Eng] 11.4. [Dksf 48.4 Iu] How To Determine A Firmware Version Of An Ir Module - NetPing 8/PWR-220 v3/SMS User Manual

[ENG] 11.4. [DKSF 48.4 IU] How to Determine a Firmware Version of an IR Module?

To determine a firmware version of an IR module, go to the web page «
In the section « Saved IR Commands
where:
HW – is a hardware version of an IR module.
BL – is a Bootloader version of an IR module.
FW – is a firmware version of an IR module.
A version of the hardware, loader and firmware can be seen if a module is correctly connected to a device and works properly. Otherwise, in
the section « Saved IR Commands
Copyright © NetPing east Co., Ltd E-mail:
» there is an inscription « A version of a connected IR control module is IRC-TR v2: HW X.X / BL X.X / FW X.X
» there will be an inscription
support@netpingdevice.com Phone:+886-2-23121582
IR Commands » of a device web interface:
«External IR Remote device IRC-TR v2 is not attached or is not operating!
»
»