NetPing 8/PWR-220 v3/SMS User Manual page 115

ETHERNET LINK STATUS: 1 UP|DOWN, 2 UP/DOWN
A device has an embedded 3 port switch with two external ports and one internal port, to which a CPU is connected.
A notification about restoring and losing a connection with a specified IP address (the module «
PINGER STATUS: OK|FAILED (
where:
IP/HOST – is an address of a tested IP address/host
Notifications about availability of 220V voltage in the network at power supply inputs (a voltage available or not available)
NO AC ON AC INPUT i
AC IS OK ON AC INPUT i
where:
i – is a number of a power suuply input, 1 or 2
A notiifcation about switching a group of sockets to a backup power supply intput (with a timely deenergizing of a group of sockets for the time of
sitching an input):
OUTLETS gg SWITCHED TO AC INPUT
where:
gg – is a group of output sockets, 1..4 or 5..8
i – is a number of a power supply input, 1 or 2
label – is a label of a power supply input, which is set in the field «
quotes in a text of a notification. If a label is not set (empty), then it is not included into SMS.
A notification about changing a status of an IO line:
IO n= 0|1 "label" "transcript"
where:
n – is a number of an IO line, 1..4
label – is a label of an IO line, which is set in the field «
then it is not included into SMS.
transcript – is an explanation of a logic level of an IO line, which is set in a pop-up dialog for configuring notifications from IO lines at the page «INPU
T-OUTPUT » of a device web interface. If an explanation is not set (empty), then it is not included into SMS.
Copyright © NetPing east Co., Ltd E-mail:
IP/HOST )
i "label"
Memo » at the page «
Memo » at the page «
support@netpingdevice.com Phone:+886-2-23121582
PINGER »):
AC OUTLETS » of a device web interface. A label is enclosed in
INPUT-OUTPUT » of a device web inerface. If a label is not set (empty),