R+|R- «+» or «-» means allowed or forbidden autoreturn of a group to the main input
–
AC1+|AC2+ «+» or «-» means presence or absence of voltage at inputs 1 and 2
–
A response to a request (NETPING N?
NP REPLY N=1 kkkkkk
where:
N=1 – a specified IP address responds
N=0 – a specified IP address is silent
A response to requesting (NETPING Tb?
NP REPLY Tb? SENSOR FAILED kkkkkk
A response to requesting (NETPING Tb?
NP REPLY Tn=tC BELOW/IN/ABOVE SAFE RANGE (t1..t2C) kkkkkk
where:
n is a number of a temperature sensor
–
tC – is a current temperature
value, °C
BELOW/IN/ABOVE SAFE RANGE (t1..t2C) – is a status of a temperature sensor (adjust range of values within a normal temperature)
A response to requesting (NETPING H?
NP REPLY H? SENSOR FAILED kkkkkk
A response to requesting (NETPING H?
NP REPLY H=h% BELOW/IN/ABOVE SAFE RANGE (h1..h2%) T= tC kkkkkk
where:
h% – is a current value of a relative humidity, in %
tC – is a current value of a temperature,
BELOW/IN/ABOVE SAFE RANGE (h1..h2%) – is a status of a humidity sensor (adjusted range of values within a normal relative humidity)
Copyright © NetPing east Co., Ltd E-mail:
kkkkkk
) about a status of a pinger, embedded into an SMS module:
kkkkkk)
readings of a temperature sensor. A sensor with a number b failed or is not connected:
kkkkkk)
readings of a temperature sensor:
kkkkkk)
readings of a humidity sensor. A sensor failed or is not connected:
kkkkkk)
readings of a humidity sensor:
in °C
support@netpingdevice.com
Phone:+886-2-23121582