Input Method - Haier A7+ User Manual

you can:
•
Set current call in holding state and answer for second call.
•
Press [On/Off] to stop current call then take usual operation to answer for or reject
second call.

2.5 Input method

The phone uses T9 input method.
You often need to input text message when using phone. Such as, name in phonebook,
SMS and text, test in notebook, grouping name and etc.
There are four different input modes, which is shown as following:
•
T9 Spanish(T9spa/T9Spa):allow to use T9 Spanish;
•
T9 English (T9eng/T9Eng): allow to use T9 English;
•
Multi-Tap （ abc/ABC） ： Press the key including the letters you need, first letter will be
displayed when you press the key for first time, press twice quickly to display
second letter on the key, the rest may be deduced by analogy to display required
letter on screen.
•
Number (123): allow to input number;
Switch input mode
After open an editor, press [#] to switch input mode. Press [#] repeatly to switch
circulately between four input modes.
Switch capital and small English/Spanish
In English editor, press [*] can switch capital and small English.
In Spanish editor, press [*] can switch capital and small Spanish.
Input symbol
In English/Spanish input mode, you need to press and hold [*] for a long time to switch to
symbol input screen. Press corresponding number at left of symbol to input symbol and return
original input mode automatically. If number of symbols is more than one screen, press [Up]/
[Down] to turn.
Delete operation
When input row is non-empty, press [SKR] will delete the rightist character or symbol in
the row firstly. At the same update the content of stand-by row until whole input row is
deleted. Press and hold [SKR] will clear input rows.
When stand-by row is non-empty and input row is blank, press [SKR] will clear content
11