Press and hold [On/Off] for a long time in any situation to turn off phone power.
2.3 Dial number
This function can be used only after network name displays on screen.
Input phone number.
Press [Pickup] to dial directly; or enter option menu, select dial or IP dial. The
function of Dial is completely same as [Pickup]. If you select IP dial and has input IP
number in phonebook menu, phone will automatically add the service number in front
of the number you input then dial, if no IP service number is input, it will ask you to
input the service number.
You can press [SKR] or [On/Off] to stop call. Fold phone up also can stop call.
Dial up international long distance
Press and hold [*] until + appear on screen.
Input country number.
Input section number (it usually doesn't include front 0) and phone number.
Press [Pickup] to dial directly; or enter option menu, select dial or IP dial.
Dial two phones at the same time (need network support)
You can set current call in holding state and dial another phone at the same time:
Use Call menu to set current call in holding state. Enter phonebook and select a
number, or input the number from keypad directly.
Press [Pickup] to dial;
Switch call (need network support)
If phone now receives two calls at the same time, one is in holding state and the other is in
active state, you can use call menu to switch between two calls.
2.4 Answer call
Press [SKL] or [Pickup] to answer.
Press [SKR] soft key or [On/Off] to reject call.
Answer for second call (need network support)
If phone set call waiting function, it will give a prompt when there is a second call, here