ResMed Elisee 350 Clinical Manual page 14

Patient circuit connection modules
One of two modules can be connected to the left-hand side of the ventilator:
•
•
Single circuit support
Right-hand side
Rear view
8/102
The single circuit support, which has connectors for the expiratory valve control tube and
the proximal pressure line
The double circuit support, commonly known as the expiratory valve. This removable
support has an external clapper where the expiratory limb of the circuit is connected.
Expiratory valve control
connector
Proximal pressure line
connector
Mains supply socket (if the mains power pack is
installed)
High-pressure O connector (standard
2
connector)
Expiratory valve
Clapper
Cover
On/Off button
Remote alarm socket (
system
Serial link socket
External DC power socket 12–28 V/15 A max (compatible with 12–
28 V batteries for road and air transport)
Nebuliser outlet
( )
) for connection to a centralised alarm
( )
Exhaled air vents (do not cover)
Access to O sensor
2
Air inlet (do not cover)
Low-pressure O port
2
NOT013281-8