ResMed Elisee 350 Clinical Manual page 99

Ventilator with double circuit (Ø 22 mm), product code CIR009727 & accessories (filter,
humidifier, etc.)
•
Device volume: 1700 mL
•
Device compliance: 1.7 mL/cm H
•
Inspiratory resistance @ 60 L/min: 4.3 cm H
•
Expiratory resistance @ 60 L/min: 3.0 cm H
High-pressure oxygen
•
High-pressure oxygen port: 240–700 kPa, 150 L/min maximum
•
In (A)CV mode, with V
FiO = 100%: O
2
Operating, storage and transport
Normal operating conditions
•
Ambient temperature when the device is running on battery power: -10°C to +40°C (14 to
104°F)
•
Ambient temperature required for recharging the batteries during operation: +5°C to +40°C
(41 to 104°F)
•
Ambient relative humidity: 10% – 95%
•
Atmospheric pressure: 600 to 1100 hPa.
CAUTION
The performance of the device is not guaranteed in operating conditions other than those
described above.
Storage conditions
•
Storage temperature: -10°C to +50°C (14 to 122°F)
•
Ambient relative humidity: 10–90%
•
Atmospheric pressure: 500 to 1100 hPa
•
The device is fragile. Keep dry and store in its operating position or in its bag.
CAUTION
We recommend that you store the device in its packaging or in its bag. If the device is stored
outside of its packaging, it must be placed flat on its base.
Conditions for transport when not delivering ventilation
When returning to the service centre, the ventilator and its accessories must be transported
inside the ResMed packaging. They must be transported in the following conditions:
•
Storage temperature: -10°C to +50°C (14 to 122°F)
•
Relative humidity: 10–90%
•
Atmospheric pressure: 500 to 1100 hPa.
CAUTION
The device is fragile.
NOT013281-8
O
2
= 500 mL, PEEP = 7 cm H
T
consumption = 18 L/min ± 20%.
2
O
2
O.
2
O, F = 15 bpm, I:E = 1:2.0 and
2
Technical specifications 93/102