ResMed Elisee 350 Clinical Manual page 48

Trolley
1
Support
plate
Mounting bracket
Use the mounting bracket to attach the ventilator to a bed frame, chair back or standard
equipment support system.
For further details, refer to the user guide for this accessory.
Ergonomic transport bag
This bag is intended to carry and protect the ventilator during ventilation, both indoors and out of
doors. It provides protection against moderate impacts and moderate rain exposure.
For further details, refer to the user guide for this accessory.
See also "Recommendations for use during transport" on page 50.
42/102
Mounting adapter
Arm
2
3
1. Use an Allen key to attach the mounting adapter to the
Elisée 350.
2. Then connect the ventilator to the attachment groove on
the trolley.
3. Swing the ventilator downwards so that it rests on the
support plate.
Note: An arm is attached to the trolley to hold the patient
circuit.
NOT013281-8