Finding Additional Information - Omron Hornet 565 Quick Setup Manual

1.8 Finding Additional Information

Installing Optional Equipment
For details on installing optional equipment, see the following topics in the Optional Equip-
ment Installation chapter of the Hornet 565 user's guide:
Installing end-effectors
l
Connecting user air and electrical lines to user connection panel
l
Mounting external equipment on the robot
l
Mounting the robot solenoid option kit
l
NOTE: For dimensions and specifications, see Technical Specifications in the Hor-
net 565 User's Guide.
System Operation
For details on system operation, see the following topics in the System Operation chapter of the
Hornet 565 user's guide:
Robot Status LED Indicator
l
Status panel fault codes
l
Brake Release button (located above or in diagnostic panel). To move Joint 3 manually,
l
press the Brake Release button.
Connecting digital I/O on the XIO connector at the robot interface panel
l
Connecting a user-designed E-Stop System
l
For information on the ePLC Connect software interface, refer to the ePLC Connect 3 Software
User's Guide.
Chapter 1: Hornet 565 Quick Setup Guide
Hornet 565 Robot Quick Setup Guide, 14692-000 Rev C
Page 17 of 18