Table of Contents
Advertisement
Chapter 1: Hornet 565 Quick Setup Guide
The IP address detection and configuration window will open. The ACE software will show
the IP address of any controllers it detects. See the following figure.
4. You can change the IP address and subnet mask in the Desired Address and Desired
Subnet fields, if needed.
5. Click OK. The ACE software will ask you to wait for the controller to reboot.
Hornet 565 Robot Quick Setup Guide, 14692-000 Rev C
Figure 1-11. Detect and Configure Button
Figure 1-12. IP Addresses Detected
Page 15 of 18
Advertisement
Table of Contents
