Chapter 6. System Operation; Pin-Outs - Comtech EF Data CSAT-5060 Installation And Operation Manual

Chapter 6. SYSTEM OPERATION

This section contains instructions for operating the CSAT-5060, 5 to 25 Watt Mode
C-Band Transceiver. The Primary customer interface to the CSAT is via the Remote
Communications port.
command/response structure used on this interface. This section will define in detail the
controllable parameters provided via the command/response structure.
6.1 P -
IN OUTS
6.1.1 C
ONNECTOR
VAC.
WARNING
Appendix A provides details regarding the protocol and
J3: AC P
OWER
To avoid a serious shock hazard, correctly determine the mating connector type
in use and wire it according to the following table:
EARLY UNITS
Mating Connector Type
KPT06J12-3S
Pin
MS3116J12-3S
A Line
B Ground
C Neutral
, M , 100 125 VAC,
AINS TO
NEWER UNITS
Mating Connector Type
CA3106E18-22SB
Ground
Neutral
Line
6-1
205 240
OR TO