Single-Thread Installation; Figure 2-3 Single-Thread Installation; Figure 2-4 Preparing The Pole Bracket - Comtech EF Data CSAT-5060 Installation And Operation Manual

5 to 25 Watt Model C-Band Transceiver

Single-Thread Installation

2.4.2 S -T
INGLE HREAD
1. Place Unistrut bracket (1, Figure 2-1) on a flat surface.
2. Slide springnuts (9) into the channel of the Unistrut bracket.
3.
Fasten two pipe blocks (11) loosely to the springnuts using two bolts (6), two flat washers
(7), and two split washer (8).
I
NSTALLATION
2-5
Revision 1
MN/CSAT506025.IOM
Figure 2-3. Single-
Thread Installation
Two RF Cables (TX/RX)
IMPORTANT
and a LNA are required for
installation.
Figure 2-4. Preparing
the Pole Bracket