Specifications - Comtech EF Data CSAT-5060 Installation And Operation Manual

5 to 25 Watt Model C-Band Transceiver
Introduction
1.6 S
PECIFICATIONS
Transmit
requency RF
Standard:
S
H
I
Frequency IF
Output Power, P1Db
Gain
Attenuator Range
Gain Flatness
Gain Stability
Carrier Mute
Inter-modulation
Second Harmonic
Spurious
AC line harmonics:
Carrier related:
All other in-band:
AM to PM Conversion
RF Output VSWR
RF Output Connector
IF Input Impedance
IF Input VSWR
IF Input Connector
5845 to 6425 MHz
6425 to 6725 MHz
5850 to 6650 MHz
5845 to 6725 MHz
70 ± 18MHz
140 ± 36MHz (Optional)
5 W +37dBm
10 W +40dBm
25 W +44dBm
5 W 65db
10 W 68db
25 W 71db
25 dB in 0.25 dB steps
±0.75dB full RF band
±0.75dB per 36MHz
±0.25dB at constant C
±1.00dB from -40º to+55ºC
(-40 to 131ºF)
-70dBc
-33 dBc for two carriers at
-6dB OPBO from rated
power
-55 dBc
-45dBc
< 500kHz -60dBc
-65dBc
3.0 ° at 6dB
OPBO from rated power
1.25:1
5 W Type N Female
10 W Type N Female
25 W Type N Female
50 Ω
1.25:1
Type N Female
Frequency RF
Frequency IF
Gain, without LNA
Attenuator Range
Gain Flatness, without LNA
Gain Stability, w/o LNA
Output Power, P1dB
Two Tone Inter-modulation
Image Rejection
RF Input VSWR
RF Input Connector
IF Output Impedance
IF Output VSWR
IF Output Connector
Conversion
Frequency Step Size
Frequency Stability
Attenuation
Phase Noise
1-6
Revision 1
MN/CSAT506025.IOM
Receive
3400 to 4200 MHz
70 MHz ±18MHz
140 MHz ±36MHz (Optional)
45dB
20 dB in 0.25 dB steps
± 0.75dB full RF band
± 0.75dB per 36MHz
± 0.25dB constant temp.
± 1.00dB -40º to +55ºC
(-40 to 122ºF)
+13dBm
-50 dBc for two tones at
0 dBm each, 1MHz apart
-60dBc
1.25:1
Type N Female
50Ω
1.25:1
Type N Female
Common
Dual, no spectral inversion
1.0 and 2.5 MHz automatic
-9
1x10 /day
-7
1x10 /year
-8
40º to +55ºC 1x10 /Temp.
(104 to 13ºF)
Tx 0 to 25dB in 0.25dB steps
Rx 0 to 20dB in 0.25dB steps
100 Hz -66dBc/Hz
1 kHz -76dBc/Hz
10 kHz -86dBc/Hz
100 kHz -96dBc/Hz