5 to 25 Watt Model C-Band Transceiver
Installation
5.6 LNA OMT MOUNT
1. Remove the protective cover from the antenna OMT.
2. Install the appropriate gasket (Figure 5-4) on the antenna end of the TRF.
5. Position the LNA switch assembly (with gasket) in place on the antenna and
Figure 5-7. Installation of the Redundant LNA Assembly.
•
If only one of the mounting surfaces has a groove, use the half-thick
gasket.
•
If both mounting surfaces have grooves, use the full-thick gasket.
fasten using the supplied hardware.
5-8
Revision 1
MN/CSAT506025.IOM