Connect Cabling To The Remote Switch Box, As/0490; Figure 4-7 Remote Switch Cast Box And Hardware - Comtech EF Data CSAT-5060 Installation And Operation Manual

5 to 25 Watt Model C-Band Transceiver
Redundancy Installation
4.4.3 C C
ONNECT
1. Connect one end of the RF cable, (4, Figure 4-3) to UNIT A connector.
2. Connect one end of the RF cable, (5) to UNIT B connector.
3. Connect one end of Cable (2) to RX SWITCH connector of the switch box
(1, figure 4-4).
4.
Connect one end of Cable (3, figure 4-3) to TX SWITCH connector of the switch box
(1, figure 4-4). Set box aside for later installation.
R
ABLING TO THE EMOTE
S B , AS/0490
WITCH OX
Figure 4-7. Remote
Switch Cast Box and
Hardware
4-8
Revision 1
MN/CSAT506025.IOM