5 to 25 Watt Model C-Band Transceiver
SPAR- Mount Installation
3.4.2 M
OUNTING
1. Install four bolts (7, Figure 3-2) and flat washers (4) to the transceiver. Do not tighten at
this time.
2.
Install brackets (2) on the SPAR. Position brackets (2) against bracket (3) and secure with
flat washers (4), split washers (5), and screws (8).
Observe the orientation of the "Key" slots used for mounting the CSAT Transceiver.
IMPORTANT
3.
Lift the transceiver and slide the bolts heads into the holes of bracket (3). Hook in place.
Tighten the bolts.
I
NSTRUCTIONS
3-4
Revision 1
MN/CSAT506025.IOM
Figure 3-3.
Mounting
Instructions