Comtech EF Data CSAT-5060 Installation And Operation Manual page 12

5 to 25 Watt C-Band Transceiver
Preface
Overview of Changes made to Revision 0:
General – Rearranged document to place each installtion into it's own chapter. Deleted
Table numbers for the kits. Added the kits to the Figure.
Chapter 1 – Revised 1.6 Specifications and added Figure 1-4.
Chapter 2 – Single-Thread Installation only.
Chapter 3 – Spar-Mount Installation only. Revised mounting kit, KT/9676-1 and –2.
Chapter 4 – Redundant Installtion only. Added item numbers to Figure 4-2. Revised
Chapter 5 – LNA Installation only. Revised Figure 5-1 to delete item 4.
Safety Notice
This equipment has been designed to minimize exposure of personnel to hazards.
The operators and technicians must:
•
Know how to work around, with and on high voltage equipment.
•
Exercise every precaution to ensure personnel safety.
•
Exercise extreme care when working near high voltages.
•
Be familiar with the warnings presented in this manual.
CAUTION
Lithium Batery Replacement
WARNING
Added assembly installation.
Figure 4-13.
A Neutral Fusing - Double pole/ neutral fusing used on the prime power
supply input.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufactuer. Dispose of used
batteries according to battery manuafuactuer.
x
Revision 1
MN/CSAT506025.IOM