Mechanical Interface - Comtech EF Data CSAT-5060 Installation And Operation Manual

5 to 25 Watt Model C-Band Transceiver
Redundancy Installation
4.5.2.7 RX IF I
NTERFACES
The RX IF output signal is fed to the customers equipment from the RSU-5060 at connector J9.
The RSU-5060 contains a power combiner which takes the IF input signals from both CSAT A
and CSAT B via the J10 and J11 connectors and provides a single output signal at J9. The IF
output power at J9 will nominally be 3dBm less than the IF input power at either J10 or J11.
4.5.3 M
ECHANICAL
The RSU-5060 is housed in a weather resistant, sealed aluminum housing with five external
circular connectors and six Female N-Type connectors. The mechanical dimensions and mounting
interface are shown in figure 4-13.
, J9 – J11
I
NTERFACE
4-18
Revision 1
MN/CSAT506025.IOM