Single-Thread Lna Installation; Figure 5-4 Installation Of A Single Lna - Comtech EF Data CSAT-5060 Installation And Operation Manual

5 to 25 Watt Model C-Band Transceiver
Installation
5.4 S -T
INGLE
The LNA is mounted to the OMT using the Waveguide Kit, CPR229, PN AS/0461. To install a
single LNA to an antenna, proceed as follows:
1. Remove the protective cover from the antenna OMT and LNA.
2. Install the appropriate gasket (figure 5-3) on the antenna end of the LNA.
3.
LNA I
HREAD NSTALLATION
a. If only one of the mounting surfaces has a groove, use the half-thick
gasket (2).
b. If both mounting surfaces have grooves, use the full thick gasket (5).
Position the LNA (with gasket) in place on the antenna and fasten using the
supplied hardware.
Figure 5-4. Installation of a
Single LNA
5-5
Revision 1
MN/CSAT506025.IOM