Version 7.0.4 System Limitations - Polycom MGC-25 Release Notes

MGC Release Notes - Version 7.0.4
28
Table 6: Corrections between Versions V.6.xx and V.7.0
#. Category
18.
MGC Manager
19. MGC Manager
20. People+
Content
21. Presentation
Mode
22.
Pro-Motion
23. Pro-Motion
24.
T.120
25.
Video+
26. Video
Switching
Description
The MGC Manager application
closes when modifying participant
templates while trying to exit the
Database Manager without saving
the changes (selecting Cancel when
prompted to Save changes).
Participants disappear after they
have been dragged-and-dropped into
a reservation.
In a Video Switching People+Content
conference, a participant connecting
to the conference without opening the
Content channel becomes
"Secondary" when changing the
video mode and if the Video Out
check box is checked.
When creating a new Continuous
Presence conference using the
WebCommander and selecting
Presentation Mode, COP or Same
Layout cannot be selected.
VSX 7000 endpoints connect
Secondary in Pro-Motion
conferences.
The system does not block
Pro-Motion conferences under 768
Kbps.
Faulty connections may occur when
connecting multiple endpoints in
NetMeeting sessions to a T.120
conference.
During the Video+8 card startup, unit
startup problems may occur. These
problems are eventually corrected by
the system.
Distorted video may result when a
CIF Video Switching conference
changes to QCIF mode.
ID# Remarks
14789
15576 It is
necessary to
open
reservations
before
adding
participants
to them.
17536
14740 First select
COP or
Same Layout
and then
select
Presentation
Mode.
14850
14912
14975
14903
13674