Polycom MGC-25 Release Notes page 31

Table 6: Corrections between Versions V.6.xx and V.7.0
#. Category
10. General
11.
H.320
12. H.323
13.
Interoperability
14. Interoperability
15. Interoperability
16. IP+48
17. MGC Manager
Corrections, Limitations and Pending Issues
Description
The option to edit system files is not
blocked for Operators.
In Continuous Presence conferences
set to 2x2 layout, the top left window
display is empty after changing the
participant name.
When an H.323 endpoint dials
another H.320 endpoint with gateway
calls using the Address Book method
and without entering the Session
Profile ID (dialing <prefix#E164>), the
MCU uses a session ID other than
the default Session ID.
When Tandberg endpoint is the first
to connect to a Video Switching
People+Content, the endpoint
connects as Secondary and the
status constantly changes between
"Secondary" and "Partially
Connected".
When two VCON endpoints (one
support only H.261 and the other
supports H.261 and H.263) connect
to a conference, then the endpoint
supporting only H.261 disconnects
from the conference, and the second
VCON endpoint connects as
Secondary.
Asserts can occur when a VSX
endpoint connects to a SWCP
conference set to 384 Kbps
Restricted and the endpoint connects
as Secondary.
When dialing out from an IP Only set
to 512 or 768 Kbps, Pro-motion
conference to an iPower version 6.0,
the endpoint connects as Secondary.
When disconnecting this endpoint
from the conference, the IP+48 card
crashes.
The 'Move' option is not available in
the right-click menu of dial-in
participants.
ID# Remarks
14964
6650
14872 It is
recommende
d to define all
Session IDs
with the
same
number of
digits.
17318 Connect the
Tandberg
endpoint
after the first
participant
connected to
the
conference.
17436
17508
17522 DevTrack -
1295
14701 You can
move the
participants
using drag
and drop.
27