Corrections Between Versions V.7.0 And V.7.0.1 - Polycom MGC-25 Release Notes

Video conferencing bridge
Hide thumbs Also See for MGC-25:
Table of Contents

Advertisement

Corrections between Versions V.7.0 and V.7.0.1

Table 5: Corrections between Versions V.7.0 and V.7.0.1
#.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Category
Description
Ad Hoc
During an Ad Hoc conference, when
conferencing
the chairperson presses DTMF code *3
to invite a PSTN invitee, an Assert
occurs.
Audio+
After 40 cycles of starting and
terminating a conference that includes
many participants, the Audio+96 card
may crash.
Cascading
Error messages are displayed when
cascading conferences run on an MGC
MCU and a Tandberg MCU.
Cascading
Occasionally, the IP+12 card crashes
when IP participants connect to a
cascading P+C/H.239 conference for
longer than two hours.
Cascading
Asserts may occur when connecting
cascading conferences with an H.323
link.
COP
In a conference set to H.264, when
endpoints connect, the frame rate
decreases.
COP
In a COP conference, when
disconnecting a participant, video loss
(Video Out 0) to all conference
participants may occur.
CP
In a large Continuous Presence
conference where the participants
reside on more than one video card, the
video layout background screen flashes
(blue screen effect) when there is an
exchange of speakers between the two
video cards.
CP
In an H.263 conference after changing
layouts of participants and speaker, the
Video card may crash.
CP
In a H.263 conference, after changing
layouts of participants and speaker no
outgoing video stream is sent.
CP
An H.263, FECC conference with a line
rate set to 786Kb may have
fragmentation in the video.
Corrections, Limitations and Pending Issues
ID#
14821
19930
13345
17326
19802
19602
19838
14213
19396
19413
19452
Remarks
This is an
endpoint issue
and not the
MCU's
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgc-50Mgc-100

Table of Contents