Dongle Upgrade; Dongle Information - Polycom MGC-25 Release Notes

Dongle Upgrade

Dongle Information

The MGC-50/100, MGC+50 and MGC+100 are shipped with a dongle installed on COM1
of the rear panel. The MGC-25 is shipped with a dongle installed on parallel port of the rear
panel.
To verify if you have a dongle you are required to inspect the rear panel of the MCU as
shown in Figure 1. The dongle label also includes the dongle serial number.
Figure 1: MCU-100 & MCU-25 rear panels and their dongles
The system displays information about the MCU disk.
In case the number of Available Bytes is lower than 150,000,000, please contact
support before installing the new version.
In an XP system, the display truncates the last 3 digits.
Software Upgrade Procedure
7