Polycom MGC-25 Release Notes page 34

MGC Release Notes - Version 7.0.4
Table 7: System Limitations (Continued)
No.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
30
Category Description
COP In COP conferences, when the
chairperson enters the conference with
Click&View, all other participants see
the Click&View slide instead of the
conference video.
COP In Conference on Port, Lecture Show
is disabled.
COP Occasionally, when using the option of
Noisy Line Detection, the speaker
indication does not indicate the current
speaker.
COP When moving participants back and
forth between two COP conferences
the video may need to be manually
refreshed due to bad video
synchronization.
CP In a Continuous Presence conference
set to Same Layout, the Personal
Layout option is enabled in the
Click&View application although this
option is not applicable to the Same
Layout mode.
CP In a CP conference, the speaker
position in the CP layout window is not
maintained when the layout is changed
back and forth.
CP In a conference set to H.264 CIF, when
the Exclusive Speaker is changed the
Video Protocol also changes to H.263.
CP With an endpoint set to Personal
Layout and if a Video parameter is
altered, the video layout changes
automatically to Conference Layout.
DB Manager When two operators are saving
modifications in the Access DB with
the same reservation, the second
(slower) operator will get an error
message when reading from DB.
Double A local Gateway Session using the
Gateway Remote GW Link window always uses
the default profile.
Entry Queue If no IVR Service is assigned to an
Audio Only conference, participants
connecting to the conference via Entry
Queue can access a locked On Going
conference.
Workaround/
ID#
Remarks
13200 Connect the
chairperson prior to
the other
participants.
13201
13549
14156
11605
13703
18244
19498
4710 Caused by MS
Access limitations
—
—