Polycom MGC-25 Release Notes page 28

MGC Release Notes - Version 7.0.4
Table 5: Corrections between Versions V.7.0 and V.7.0.1
#.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
24
Category Description
CP When running conferences set to H.264
and XGA Video Format, the video+
card may crash.
H.323 An exception may occur when
connecting more than 96 H.323
participants in a blast dial-out
conference.
Lecture Mode - No video when connecting a single
CP conference participant to a CP conference set to
Lecture Mode and resources are
allocated on the Standard Video card.
Lecture Mode - Incorrect speaker is displayed when the
CP conference first participant who connects to the CP
conference set to Lecture Mode
running on the Standard Video card is
muted and the second participant is
unmuted. The first participant remains
the speaker although the second
participant should have been selected
as the speaker.
MGC Manager In the MGC Manager monitoring pane
refresh problems may cause wrong
endpoint status.
MGC Manager When creating a new ISDN Network
Service, after adding several different
Spans, the MGC Manager crashes.
MGC Manager No 'Faulty connection' indication in the
MGC Manager application.
Video A blue screen is displayed for 1-1.5
seconds when the speaker changes in
a conference with more than 10
participants in Classic or Quad Views
CP conference running on the Video+
card.
Video VSX endpoint connect as Secondary
(audio only) when connecting via ISDN
to a VSW conference set to Auto mode,
as the endpoint uses encryption for the
connection.
Video Conferences with 4CIF or higher Video
Formats may encountered brief video
interruptions.
Video In a conference set to 256Kb line rate,
Switching connecting and disconnecting ISDN
endpoints cause the MUX+ card to
crash.
ID# Remarks
19535
19887
17571
19860
19939
20194
16032
18991 This is an
endpoint issue
and not the
MCU's.
19462
19680