Polycom MGC-25 Release Notes page 36

MGC Release Notes - Version 7.0.4
Table 7: System Limitations (Continued)
No.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
32
Category Description
General Participants moved between
conferences can be listed in both
conferences.
General When a defined dial-in participant is
moved to the Operator conference with
"Attend with details", and disconnects,
the Attended Participant window
cannot be closed and the participant
disappears from the conference (as an
undefined participant).
General When a cellular phone disconnects
from a conference, the user is unaware
of the disconnection and a busy tone
can be heard by all of the remaining
participants.
General When the participants name has been
changed and you add a new
participant using the first participant's
former name, a message "STATUS
PARTY NAME EXISTS" appears.
General When removing cards from the MCU
while conferences are on-going,
asserts and ports deficiencies may
occur.
General After version upgrade and a
reservation restore is performed on the
MCU, there is no connection.
H.323 In H.323 Fixed Ports mode - although
only two ports are allocated to audio
and two ports to video, defining a
range of two consecutive ports for
each will result in an error message
indicating ports overlap.
H.264 IP Participants are connected as
Secondary when moved from a CP/
H.264 conference to a CP COP/H.264
conference running at a different line
rate.
H.239 When sending Content from two
endpoints at the same time (within the
same second), one endpoint will not be
able to send Content again.
Interop After moving a participant with a
Tandberg endpoint to a conference
without H.263 annexes the endpoint
remains secondary.
Workaround/
ID#
Remarks
14424
14813
and
14838
15123
19350
19506
20640
— Define the range
leaving a 2-port
gap.
17198
20452
17624