Polycom MGC-25 Release Notes page 22

MGC Release Notes - Version 7.0.4
Table 2: Corrections between Versions V.7.0.3 and V.7.04
#.
10.
11.
12.
13.
14.
15.
16.
17.
18.
18
Category Description
General The MCU self-reboots with no activity
on it, NVERCFG.CPP asserts appear.
GW Connecting POTS to H.323 by the
MGC Gateway fails in Version 7.x
XPEK MGC
IP The Stack Controller and RTP
processors crash even when no
conferences are running on MCUs with
an IP24 card.
Lecture Mode In a VSW lecture, ISDN or IP
conference, you can not force a
lecturer from the MGC Manager
conference properties.
Lecture Mode In an H.320 Only conference with
Lecture Mode and Auto switching
between participants enabled, the
video of the Lecturer does not
synchronize each time that new
participants join.
Lecture Mode The Auto switch timer in Lecture Mode
doesn't work if the lecturer is
connected by an IP endpoint.
VSW When you switch between endpoints in
large Video Switching (86 participants)
conferences with 128 kbps line rate
using H264 video protocol, an assert
error and poor connection between the
MCU and the MGC Manager resulting
in an auto reboot.
P+C In an H.239, P+C conference, ISDN
endpoints cannot reconnect after being
disconnected. An error is displayed:
"End init com not received".
Video The endpoint doesn't change mode
from QCIF to CIF in H264.
ID# Remarks
22097
21916
21456
20653
21543
21774
21673
21951
20857