Polycom MGC-25 Release Notes page 33

Video conferencing bridge
Hide thumbs Also See for MGC-25:
Table of Contents

Advertisement

Version 7.0.4 System Limitations
Table 7: System Limitations
No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Category
Description
Ad Hoc
Assigning an Audio Only Profile to a
conferencing
video Ad Hoc-enabled Entry Queue
causes faults.
Audio+
In some conferences, the first
participant hears a faint clicking sound
when the second participant interacts
with the IVR Service.
Audio+
After swapping an Audio+ card
(removing an existing one and
inserting another in the same slot) the
IVR prompts are not loaded to the new
Audio+ card.
Audio+8
Audio+8 card does not support
participants using T1-CAS lines and
G.729 endpoints.
Cascade
Cascading is not available for Software
CP conferences.
Cascade
When cascading Continuous Presence
and Video Switching conferences, the
speaker is assigned a wrong site
name.
Cascade
In a cascading conference, morphing
may occur after the speaker changes.
Cascade
No Cascade in CP Quad conferences.
Cascade
Cascading between H.264
conferences may cause video freezes
and artifacts.
CDR
"Low Memory" alert may appear on
screen when retrieving large
(megabyte and larger) CDR files.
Chair control
In Chair Control mode, when the chair
forces a participant to a video layout
from his/her endpoint, that participant
cannot be released from the forcing
mode in the MGC Manager
application.
Content
The refresh rate between Content
slows when using VSX7000 and
VSX8000 endpoints.
COP
Conference On Port is limited to 128
participants in a single Video card.
Corrections, Limitations and Pending Issues
Workaround/
ID#
Remarks
14591
19468
Insert another
Audio+ card into
another slot or
remove and restore
the card.
14611
5192
13289
17377
18716
19542
15132
4736
First release the
forcing and then
release the chair
token from the
MGC Manager.
21145
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgc-50Mgc-100

Table of Contents