Polycom MGC-25 Release Notes page 35

Table 7: System Limitations (Continued)
No. Category
25.
Entry Queue
26. FECC
27. FECC
28.
FECC
29. FECC
30.
Gateway
31. General
32. General
33.
General
34. General
35.
General
36. General
37. General
Description
During Entry Queue definition,
properties are taken from the IP
Service. Once an Entry Queue is
defined, you cannot delete or add any
IP Service related to that Entry Queue.
FECC functionality problems in a
Continuous Presence conference
when Exclusive Speaker mode is
active.
Only the endpoint displayed in the
layout's upper left window can be
controlled by the far end camera.
When trying to move a remote camera
using FECC, even before the video is
received more than one camera may
move.
FECC does not work between an IP
endpoint and an MPI (DTE) endpoint.
The H.323 Session Profile ID must be
composed of two digits.
When defining On Going conferences,
Reservations or Meeting Rooms and
assigning existing Numeric IDs,
asserts are displayed instead of
warning messages
With XPEK long backup times (more
than 15 minutes) for reservations
Maximum number of participants in a
conference template is 145.
A dial-out "auto detect" telephone
cannot be connected to the conference
(the option is blocked).
Unable to move participants between
Reservations using drag & drop.
When the properties of an On Going
conference are changed and the MCU
is reset, the initial conference
properties is restored on the MCU.
When using Windows "My Network
Places", MCU software installation
must be performed from a mapped
location (X:\....) and not from a network
location.
Corrections, Limitations and Pending Issues
Workaround/
ID#
Remarks
18382 Delete the Entry
Queue and redefine
it.'1
14638 DevTrack 974
16503
17975
20401
—
—
5354
5971 In an Audio Only
conference, create
a pre-defined
participant.
12498
13430
14227
31