Polycom MGC-25 Release Notes page 39

Table 7: System Limitations (Continued)
No. Category
60.
LAN.cfg
61. Lecture Mode
62. MGC-25
63.
MGC-25
64. MGC-25
65. MGC-25
66.
MGC-25
67. MGC
Manager
68.
MGC
Manager
69.
MGC
Manager
70. MGC
Manager
71.
MUX
Description
When you open the LAN.cfg with
Notepad application, the LAN.cfg the
file's content is listed in a single string.
Editing the file can result in an MCMS
crash.
In a Lecture Mode conference, when
the lecturer connects while all the
conference participants are muted, the
conference acquires the attributes of a
regular conference.
Problems occur when connecting a
mouse to the MGC-25.
After upgrading the MGC-25 card
configuration file from IP12 to
Unified24, the following major error
code appears in the Faults file:
_
INCONSISTENT INFORMATION
File Type:
CARDS CONFIGURATION FILE
cards.
An exception occurs when performing
a card version update while a
conference is starting.
The Resource Report does not display
IP capacities for line rates of 256 Kbps
and 512 Kbps.
After changing the span of the Net card
the MGC-25 must be restarted.
When defining a new Operator, the
MCU must be reset before the new
operator can perform any FTP
operation (such as sending a file to the
MCU).
When you Create Login Record from
the MGC Manager and an operator
log's on, the operator does not have
full permission as required by the
system.
Cards change to "Major" status when
MCU software is downloaded.
Low memory indication in the MGC
Manager even when conferences are
not active.
At the end of unit's reset, after one
minute the MUX card status changes
to Major and the card must be reset.
Corrections, Limitations and Pending Issues
Workaround/
ID#
Remarks
— Open the LAN.cfg
file with WordPad
and only change
the MCU's IP using
the Floppy
procedure.
5904
—
12335 Functionality is OK.
The limitation is the
appearance of the
error message.
_ _ Reset the MCU to
IN FILE
: clear the error.
17469 The MGC-25 must
be restarted.
18307
18910
—
18923
20677
20725
— Reset the card to
continue working.
35