Msr200 Bundle; Set Up The Msr200 Bundle; Verify The Trio System Software Version - Polycom MSR Series Solution Manual

MSR200 Bundle

The MSR200 bundle includes the Polycom MSR Dock with Microsoft Surface Pro, Polycom Trio 8500,
and Logitech c930e webcam.
Note: The Trio 8500 system is supported with software versions 5.5.2 and higher. For more information
on Microsoft Skype Room Systems, refer to

Set Up the MSR200 Bundle

Follow the steps below to set up the MSR200 bundle.
Note: The Polycom Trio 8500 system must meet the Minimum Setup requirements. For more
information on setting up the Trio 8500 system, refer to the
Procedure
1. Connect the power adapter or PoE cable to the Polycom Trio 8500 system.
2. Connect the Micro USB cable to the Micro-B USB port on the Polycom Trio 8500 system.
3. Connect the other end of the USB cable to a USB port on the Polycom MSR Dock.
4. Connect the Logitech c930e webcam USB cable to a USB port on the Polycom MSR Dock.

Verify the Trio System Software Version

You can view the Trio system software version using the local interface, web browser or the Control Panel
application.
Procedure
1. Do one of the following:
Polycom, Inc.
Setting Up Polycom MSR Series
Microsoft Technet site.
Polycom Support site.
5