Introduction; Purpose Of The Manual; Additional Resources; Manual And Software Version - Danfoss VLT AutomationDrive FC 361 Operating Manual

Introduction

1 Introduction

1.1 Purpose of the Manual

This operating guide provides information for safe instal-
lation and commissioning of the VLT
The operating guide is intended for use by qualified
personnel. To use the unit safely and professionally, read
and follow this operating guide. Pay particular attention to
the safety instructions and general warnings. Always keep
the operating guide with the drive.
®
VLT is a registered trademark.

1.2 Additional Resources

Other resources are available to understand advanced
drive functions and programming.
•
The programming guide provides greater detail on
working with parameters and many application
examples.
•
The design guide provides detailed information
about capabilities and functionality to design
motor control systems.
•
Instructions for operation with optional
equipment.
Supplementary publications and manuals are available
from Danfoss. See www.danfoss.com/en/search/?filter=type
%3Adocumentation%2Csegment%3Adds for listings.

1.3 Manual and Software Version

This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.1 shows
the version of the manual and the corresponding software
version.
Manual version Remarks
MG06I1xx First edition.
Table 1.1 Manual and Software Version
MG06I102
Operating Guide

1.4 Approvals and Certifications

®
drives.

1.5 Disposal

Software version
1.0x
Danfoss A/S © 06/2018 All rights reserved.
Do not dispose of equipment containing
electrical components together with
domestic waste.
Collect it separately in accordance with
local and currently valid legislation.
1 1
3