Warning System - TOHATSU MD 40B2 Owner's Manual

40
PRE-OPERATING PREPARATIONS
ENOM00039-0

5. Warning system

If outboard motor encounters an abnor-
mal condition of fault, the warning
buzzer will emit a continuous beep or
intermittent short beeps and the warn-
ing lamp (LED) will synchronize with the
buzzer and engine speed will be limited
(engine will not be stopped).
See next page for conditions which will
lead to an abnormal condition or fault.
ENOM00040-B
Location of warning buzzer and
6
lamp
Warning buzzer
RC model: Located inside the remote
control.
Multi-Func tion tiller handle model:
Located in the tiller handle. *Only for
30, 40, 50
Warning lamp (LED)
RC model: Located in the tachometer.
Multi-Func tion tiller handle model:
Located in the tiller handle. *Only for
30, 40, 50
1. Warning lamp
1. Warning lamp
1
ENOF00851-0
1
ENOF00852-0