Fuel Feeding - TOHATSU MD 40B2 Owner's Manual

A
3, 4
1. Oil tank-Filter
2. Filter-Oil Pump
3. 75,90:Oil Pump-Cylinder Block (seven lines)
4. 115:Oil Pump-Cylinder Block (nine lines)
ENOM00044-B

2. Fuel feeding

ENOW00029-A
WARNING
When opening fuel tank cap, be sure to fol-
low the procedure described below. Fuel
could blast out through the fuel tank cap in
case the cap is loosened by using another
procedure when internal pressure of fuel
tank is raised by heat from sources such as
sun light.
ENOW00947-0
CAUTION
When using a separate tank, be sure that the
fuel line is not kinked and is connected
securely.
1. Full open the air vent screw on the
fuel tank cap.
2
1
ENOF00654-0
1. Air vent screw
2. Fuel tank cap
2. Connect the fuel connector to the
engine and fuel tank.
2 2 2
1. Fuel connector
2. Pull
3. Insert
1
1. Pull
2. Insert
ENGINE OPERATION
1
2
ENOF00027-B
3 3
1
ENOF01316-0
2
ENOF00861-A
45
7