TOHATSU MD 40B2 Owner's Manual page 51

Hide thumbs Also See for MD 40B2:
Table of Contents

Advertisement

ENON00939-0
Note
The neutral throttle button can not be
push-in when the control lever shift is in
Forward or Reverse.
6. Check the cooling water from cooling
water check port.
1
1. Idle port
2. Cooling water check port 40, 50
1
1. Idle port
2. Cooling water check port 75, 90, 115
ENOM00042-A
Emergency starting
*Only for 30, 40, 50
ENOW00099-A
WARNING
When the emergency starter rope is used for
starting engine;
Start in gear protection does not work. Be
sure to shift is at neutral position. Other-
wise the engine will move the boat imme-
diately and cause personal injury.
Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
To prevent accident and injury by rotating
parts, do not re-attach flywheel cover
and the top cowl after the engine has
been started.
Do not pull starter rope if any bystander is
b e h i n d . T h e a c t i o n c a n i n j u r e t h e
bystander.
Attach engine stop switch lanyard to
clothing or any par t of body like arm
before starting engine.
1. Remove the top cowl.
2
ENOF00664-0
2. Remove the flywheel cover.
2
ENOF00665-0
3. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope around the fly-
wheel several turns clockwise.
ENGINE OPERATION
ENOF01345-0
ENOF00661-0
51
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Md 90c2Md 115a2Md 30b2Md 75c2Md 50b2

Table of Contents