Warning System - TOHATSU MFS 40A Owner's Manual

32
PRE-OPERATING PREPARATIONS
ENOM00039-0

5. Warning system

If outboard motor encounters an abnor-
mal condition of fault, the warning buzzer
will emit a continuous beep or intermit-
tent short beeps and the warning lamp
(LED) will synchronize with the buzzer and
engine speed will be limited (engine will
not be stopped).
See next page for conditions which will
lead to an abnormal condition or fault.
ENOM00040-A
Location of warning buzzer and
6
lamp
Warning buzzer
RC model: Located inside the remote
control.
Tiller handle model: Located in the tiller
handle.
Warning lamp (LED)
RC model: Located in the tachometer.
Tiller handle model: Located on the tiller
handle
ENON00009-A
Note
Warning lamp for optional tachometer will
synchronize with the warning lamp for
engine side.
1. Warning lamp
1. Warning lamp
1
ENOF00851-A
1
ENOF00852-2