TOHATSU MD 40B2 Owner's Manual page 83

75, 90, 115
4. Install the upper oil plug, and then
remove oil tube nozzle and install the
lower oil plug.
ENOW00095-0
CAUTION
Do not reuse oil plug gasket. Always use new
gasket and tighten oil plug properly to pre-
vent entry of water into lower unit.
30, 40, 50
75, 90, 115
ENOF01334-0
ENOW00928-0
Wipe off gear oil well immediately if spilled
and dispose of it in accordance with local
fire prevention and environment protection
regulations.
ENON00032-0
Note
If water in the oil, giving it a milky colored
appearance. Contact your dealer.
ENON00033-0
Note
Use genuine gear oil or the recommended
one (API GL-5: SAE #80 to #90).
Required volume 30, 40, 50: approx. 500
mL (16.9 fl.oz), 75, 90, 115 approx. 900 mL
(30.4 fl.oz).
ENOM00086-A
Propeller replacement
ENOW00084-0
ENOF01331-0
Do not begin propeller removal and
installation procedure with spark plug
c a p s a t t a c h e d , s h i f t in fo r wa r d o r
reverse, main switch at other than "OFF",
INSPECTION AND MAINTENANCE
CAUTION
WARNING
83
ENOF01332-0
10