TOHATSU MD 40B2 Owner's Manual page 48

48
ENGINE OPERATION
R
1
OFF
ON
START
PUSH TO IDLE CHANGE
1. Main switch key
2. Warning lamp
ENOW00032-1
Do not hold turning starter motor more than
7
5 seconds, or the battery may be consumed,
potentially making the engine star ting
impossible and/or damaging the starter.
If cranking over 5 seconds fails to star t
engine, return main switch to "ON", and
crank engine again after 10 seconds or more.
7. Check the cooling water from cool-
ing water check port.
1
1. Idle port
2. Cooling water check port 30, 40, 50
N
F
2
ENOF00867-0
CAUTION
2
ENOF00664-0
1
1. Idle port
2. Cooling water check port 75, 90, 115
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position. Do not raise the free throt-
tle lever when starting the engine.
2
ENOF00665-0
ENOF00869 1