Warning System - TOHATSU MFS 8B Owner's Manual

32
PRE-OPERATING PREPARATIONS
ENOM00039-C

5. Warning system

If outboard motor encounters an abnormal
condition of fault, the warning horn will
emit a continuous beep or intermittent
short beeps and the warning lamp (LED)
will synchronize with the horn and engine
speed will be limited (engine will not be
stopped).
*No horn is located for tiller handle type
and EP type.
See next page for conditions which will
lead to an abnormal condition or fault.
6
ENOM00040-C
Location of warning horn and
lamp
Warning horn
RC model (EPT type): Located inside the
remote control.
*No horn is located for tiller handle type
and EP type.
Warning lamp (LED)
RC model: Located in the tachometer &
bottom cowl.
Tiller handle models: Located on the bot-
tom cowl.
ENON00009-A
Note
Warning lamp for optional tachometer will
synchronize with the waring lamp for engine
side.
1. Warning lamp
1. Warning lamp
1
ENOF00851-A
1
ENOF01410-1