TOHATSU MD 40B2 Owner's Manual page 81

4. Check the wear and clogging for each
parts, and replace if necessary.
5. Remove fuel and any water or debris
from the cup, filter and hoses.
6. Reassemble all parts.
ENOM00096-A
Fuel filter (for fuel tank)
Water or dirt in the fuel tank will cause
engine performance problems.
Check and clean the tank at specified
times or after the outboard motor has
been stored for a long period of time
(over three months).
1. Remove four screws to remove the
Fuel Pick-Up.
2. Clean the fuel filter and replace the
gasket.
3. Reassemble all parts.
1. Fuel pick-up
2. Filter
ENOM00725-0
Oil filter
Oil filter and oil tank. Check the oil tank
and/or filter for entrapped water and
dust.
1. Disconnect all pipes between the oil
2. Clean out foreign matter.
3. Refit the pipes to the oil tank and
4. For air purging, refer to ''Engine oil
30, 40, 50
1. Oil filter
1
75, 90, 115
2
ENOF00926-1
1. Oil filter
INSPECTION AND MAINTENANCE
tank and oil pump.
pumps, and then fill up with new
engine oil.
feeding'' (See page 38)
1
81
1
ENOF01346-0
10
ENOF01347-0