TOHATSU MD 40B2 Owner's Manual page 53

ENOM00044-0
Engine speeds
Idling speed after warming up.
Remark: In case of cold engine starting,
idling speed is increased about 400 min
1
(rpm) for several minutes.
Clutch in (In gear)
-1
800 min (rpm)
ENOM00972-0
Free throttle lever (Side mount
RC type)
ENOW00956-0
CAUTION
Keep the free throttle lever fully closed-
position when start the engine.
The free throttle lever is inoperative
unless the control lever is in neutral.
Also, the control lever is inoperative
unless the free throttle lever is returned
to the fully-closed position.
The free throttle lever is for warm-up
operation.(Not required for engine
starting) With the control lever in neu-
tral, move the free throttle lever upward
to open the throttle.
1. Fully-open
2. Fully-closed
-
Clutch off (Out of gear)
-1
800 min (rpm)
1
2
ENOF00934-0
ENOM00973-0
Neutral throttle button (Top
mount RC type)
ENOW00957-0
CAUTION
The control lever does not operate unless
the neutral lock arm is pulled.
The neutral throttle button is for warm-
up operation. (Not required for engine
starting) When the control lever is in
neutral, push and hold the neutral throt-
tle button. While holding the button,
move the lever forward to throttle up
the engine.
When the control lever is returned to
the neutral position, the button will
reset automatically.
2
1
1. Neutral throttle button
2. Forward
ENOM00 -0
Trolling engine speed control
function
If the main switch key is pressed for 1
(one) second during idling or trolling
operation, engine revolution change.
ON
ENGINE OPERATION
ENOF00935-0
1
second
ENOF00876-0
53
7