Engine Oil Recommendation - TOHATSU MD 40B2 Owner's Manual

1. Full open the air vent screw on the
fuel tank cap and release internal
pressure.
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
4. After filling the tank, close the fuel
tank cap.
ENOM00037-B

3. Engine oil recommendation

ENOW00022-A
CAUTION
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before star ting engine. ( To
properly fill the engine with oil follow the
instructions, See page 74)
1
2
ENOF00027-B
1. Genuine of recommended engine oil
2. Filler lid
3. Oil tank cap
Use a genuine engine oil or recom-
mended one. Refer to your Distributor.
Will not recommended use of other two
stroke engine oil.
ENOW0002A-A
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOF00030-A
ENOW00603-0
Do not mix different brands of oil. Mixing
different brands of oil, or different types of
oil even if the brand is the same, may cause
gelling, resulting in possible filter screen
blockage. This could result in serious engine
damage because of impaired lubrication
performance.
PRE-OPERATING PREPARATIONS
1
2
3
CAUTION
CAUTION
37
ENOF00641-0
6