TOHATSU MD 40B2 Owner's Manual page 47

Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
2
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
N
1
R
1. Shift lever
1
ENOF00864-0
F
ENOF00865-0
4. Set the throttle grip to START posi-
tion.
1
1. Throttle grip
ENON00613-A
Note
Turn the throttle grip to the "START" (fully
closed), before turning the main switch
key to "ON".
The wrong operation i.e. turn the main
switch key to "ON" on the condition that
the handle grip or accel lever is opened
will be memorized by ECU (engine control
unit).
If this wrong operation has done repeat-
edly, it will have a possibility that the
three warning lamps flash. In this case,
turn the throttle grip to "START" (fully
closed) and start the next operation after
returning the main switch key to "OFF".
5. Turn the main switch key to ON posi-
tion and c onfirm thre e warning
lamps light up with buzzer sound and
then go off.
6. Turn the main switch key to START
position and release the key when
the engine has star ted. The key
returns to the original position,
automatically.
ENGINE OPERATION
ENOF00866-0
47
7