TOHATSU MD 40B2 Owner's Manual page 61

1. Perpendicular to the water surface
ENOM00053-0
Improper trim angle (bow rises too
high)
Set the thrust rod lower if the bow of
the boat rises above horizontal.
ENOM00054-0
Improper trim angle (bow dips into the
water)
Set the thrust rod higher if the bow of
the boat is below horizontal.
1
ENOF00051-1
1. Thrust rod
2. Higher
3. Lower
ENOF00052-0
1. Thrust rod
2. Higher
3. Lower
Trim angle adjustment (Manual tilt type)
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral.
3. Raise the outboard motor to the tilt
ENOF00053-0
ENGINE OPERATION
Manual Tilt type
1
2
Power Tilt type
3 3
1
up position.
61
ENOF00674-A
2 2
7
ENOF00888-0