10.15
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
10.16
Handlebar position
–
Remove protection cap
–
Turn adjusting screw
Info
Adjusting screw
right fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
M01100-10
Guideline
Rebound damping (FC 350)
Comfort
Standard
Sport
Rebound damping (FX 350)
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn counter-
clockwise to reduce the damping.
–
Mount protection cap
The holes on the handlebar supports are placed at a distance
A
of
from the center.
Hole distance A
The handlebar can be mounted in 2 different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
H01188-10
TUNING THE CHASSIS 10
1
.
2
clockwise all the way.
2
is located at the lower end of the
17 clicks
12 clicks
7 clicks
17 clicks
12 clicks
7 clicks
1
.
3.5 mm (0.138 in)
47