Table of Contents
Advertisement
10 TUNING THE CHASSIS
10.14
10.15
38
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
F02246-10
Handlebar position
601951-10
When disconnecting, excess pressure will escape from
the hose – the fork leg does not lose any air.
The fork pump airpump switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster
clockwise all the way.
Info
1
Adjuster
is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
Guideline
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn
counterclockwise to reduce damping when the shock
absorber rebounds.
On the upper triple clamp, there are 2 holes at a distance of
to each other.
15 mm (0.59 in)
A
Hole distance
The holes on the handlebar support are placed at a distance
B
of
from the center.
3.5 mm (0.138 in)
B
Hole distance
The handlebar holder can be mounted in four different positions.
This allows the handlebar to be mounted in the most comfortable
position for the rider.
p. 40)
15 clicks
12 clicks
10 clicks
A
Advertisement
Table of Contents
