Changing The Turn Signal Bulb (Eu) - Husqvarna FE 350 EU 2020 Owner's Manual

15.9

Changing the turn signal bulb (EU)

Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
Main work
–
Turn protection cap
socket counterclockwise all the way and remove it.
–
Pull bulb socket
H03753-10
–
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (HS1 / Sockel PX43t) (
–
Insert the protection cap with the bulb socket into the reflec-
tor and turn it clockwise all the way.
Info
Ensure that O-ring
H03754-10
–
Insert the bulb socket of the position light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
ELECTRICAL SYSTEM 15
1
together with the underlying bulb
2
of the position light out of the reflector.
3
.
p. 148)
4
is seated properly.
p. 118)
p. 115)
117