Chapter 4 CATV Testing
ChannelCheck
3
Assign this test to a saved work order (optional but recommended).
4
Select the button below Work Order ID and the list of available work
orders will appear. Select one.
5
Start the test by selecting the Start button at the bottom of the screen.
Results
For a detailed discussion of the results produced by this test, see the
Results chapter.
Saving results
To capture a snapshot of the results for review, press the Stop button.
To save for later review, press the Save button and then give them a
name.
Page 72
OneExpert CATV User's Guide
22121055-001, Rev000