Viavi OneExpert CATV User Manual page 117

Chapter 6 Optical Tools
Inspecting fiber
6. Do one of the following:
a
b
The test automatically centers the view (if specified to do so), captures
an image, and then analyzes it. The test result shows defects and
scratches.
7. To save the results, touch Save and then specify the file name for the
still image. The filename can be up to 50 characters, so if desired,
details such as the company name, technician, and location could be
included.
NOTE:
If you have not yet moved the report file, you can view the screen
capture portion of the result file using the File Manager. If the file has
been moved — even if it was put back in the original spot on the
OneExpert CATV — you can no longer view the file because there is a
temporary capture file included with the save that goes away when the
file is moved.
Page 94
Manually inspect the fiber.
– On the Options pop-up, verify that the Run Analysis checkbox
is not checked. The Analyze button changes to Freeze.
– Touch Freeze. This captures a still image of the fiber.
Analyze the fiber.
– On the Options pop-up, verify that the Run Analysis
checkbox is checked. The Freeze button changes to Analyze.
– Touch Analyze.
OneExpert CATV User's Guide
22121055-001, Rev000