Chapter 2 Utilities
Updating the instrument's firmware
Electrical shock may result in serious injury or death. Be sure the AC
adapter is connected to the correct voltage mains. Do not use outdoors
or in wet locations. Use only the AC adapter supplied with the tester.
2
Do one of the following:
3
Establish a wired Ethernet connection, to Port 1, from your instrument to
the intranet or network (see
page
–
Establish a WiFi connection from your instrument to the network
with the firmware update (see
page
–
Download the firmware update to a USB drive.
a
b
c
Page 38
28).
32).
Click on the top download icon (as shown) to get the latest
update.
Copy the downloaded file ONXCBL.xxx.xxx.xxx.oxu to the
root directory of a USB thumb drive.
Press Cancel once the download has completed and you
have placed the file on the USB thumb drive.
OneExpert CATV User's Guide
22121055-001, Rev000
Establishing an Ethernet connection on
Establishing a WiFi connection on